How long do you have to drive after disconnecting battery?
Wei Duchene asked, updated on May 4th, 2022; Topic:
👁 556👍 21★★★★☆4.4
Disconnecting the battery for a short time may not do the trick because the car's computer, or ECU, still has some current in it. Waiting for over 15 minutes after disconnecting the engine will help ensure the equipment is reset.
Incidently, how many miles does it take to reset a car computer?
So why is the light still on? Here's something you probably don't know: after clearing the car's computer you will need to drive for about 50 to 100 miles. As you drive your car the computer will monitor all the sensors and register the results.
Anyways, how do I pass an emissions test after changing the battery? WAIT A BIT AFTER DISCONNECTING THE BATTERY If you recently jump-started or replaced your car battery, wait at least one week before going in for a California smog check. When a car's battery dies or is disconnected, the computer resets, erasing the internal emission monitors required to pass a smog test.
Together with, how long do you have to drive to complete a Drive Cycle?
Preparation for it will take eight hours but, all in all, a basic drive cycle test should take around 30 minutes to complete, with about 20 minutes of actual driving.
How do I reset my driving cycle?
15 minutes of steady driving on an expressway/highway followed by 20 minutes of stop-and-go driving with at least four 30-second idle periods. Allow the vehicle to sit for at least eight hours without starting the engine. Then, start the engine and complete the above driving cycle.
If your car does start, let it run for a few minutes to help charge the battery further. Unhook the clamps in the reverse order of how you put them on. Be sure to drive your car for about 30 minutes before stopping again so the battery can continue to charge. Otherwise, you might need another jump start.
When the check engine light is solid, you can typically drive the car for hundreds of miles without an issue. Of course, that depends on which code is stored in the vehicle's computer. If an engine sensor is faulty, the car will usually use made up sensor values to keep running.
A faulty computer may cause the vehicle to intermittently have issues such as stalling or misfires. The symptoms may come and go, and may not appear to have any sort of pattern to their frequency or severity.
If you intend on renewing your registration through the DMV either by mail or online and before obtaining a smog check, please allow at least 30 days from the date your vehicle passes the smog inspection to receive your new registration card and sticker.
The PCM can perform this test once during the drive cycle. As I discussed earlier, most emissions-related DTCs take at least two drive cycles to set, so it stands to reason it will take at least two passes to turn off the MIL. Keep in mind the second drive cycle will not be complete until you turn off the ignition.
A driving cycle is a series of data points representing the speed of a vehicle versus time. Driving cycles are produced by different countries and organizations to assess the performance of vehicles in various ways, as for instance fuel consumption, electric vehicle autonomy and polluting emissions.
Keep the battery charged by driving your car once per week For instance, a garaged, new car — with a brand-new battery, presumably — will fare better than an older car parked on the street. Keep in mind that batteries tend to drain faster in colder climates.
Switch off your vehicle and unplug all fuses once it has completely warmed up, then detach the battery to cut power. All of the old data should be reset after a few minutes, so reconnect the fuses and restart your engine.
All car batteries are date-coded with the month and year of when it's manufactured, but they don't usually last longer than 5 years. And a dead car battery is not going to be restored no matter how long you drive. The alternator cannot turn a bad battery into a good battery—it's as simple as that.
Can you drive a car with the engine light on? It's okay to drive for a few miles, but be sure to schedule an inspection of the engine as soon as possible. If the check engine light comes on while you're driving, don't panic! ... Just be sure to have your car inspected as soon as possible after the light turns on.
That having been said, you can probably drive safely with the service engine soon light on, as long as it is on solid and not flashing. If the service engine light is flashing, you should pull over immediately and call for roadside service and have the vehicle towed to the mechanic.
The dreaded check engine light. Now, it wasn't flashing, which I knew meant the problem was urgent. But how bad was the news going to be? A new study found that the average person will wait 9 days after seeing that light pop on before taking their vehicle in to see what is wrong.
Car Not Starting A bad ECM may lead to a vehicle that won't or is difficult to start. If the ECM fails completely, it will leave the vehicle without engine management control, and will not start or run as a result.
The cost to have your vehicle's car computer reprogrammed will all depend on the dealer/mechanic you use, the vehicle you drive and your geographical location From what we researched online, the costs to simply reprogram the car's computer and nothing else would range anywhere from $80 to $180.
1. Clear that "Check Engine" light. If your car displays a "Check Engine" light, that's an automatic smog check failure. ... Sometimes, even before an oxygen sensor fails, it becomes "lazy," not properly regulating the gas/air mixture, and that will cause a smog check failure, Mazor says.
Depending on your particular vehicle's specific smog test results, using higher octane gas may help or hurt smog test results. It is our recommendation to always follow manafacturer's requirments. A properly maintained vehicle should pass the smog check with the correct fuel octane.